System Design & Installation

At Hydro Flow we custom build and install water treatment systems that are specific to your requirements.

WATER TREATMENT CONTROL MANIFOLDS

Water treatment control systems range from basic to advanced.  They can incorporate one or more controllers, probes (pH, chlorine, ORP conductivity), chemical pumps and dosing lines, bleed solenoid valve(s), a corrosion coupon rack, strainer and a small manifold pump.  Hydro Flow design and install water control manifolds of all levels of complexity.

 

FILTRATION

Hydro Flow provide supply, installation and maintenance services for a variety of filtration requirements. These include side stream filtration for cooling tower systems to aid in the removal of environmental contamination, multimedia filters, activated carbon filters for the removal of chlorine and odour, birm filters for the reduction of dissolved iron and manganese, microfiltration and ultrafiltration membrane filtration, mixed bed ion exchange, water softeners, and reverse osmosis (RO) purification.

For more detailed information, please refer to our FILTRATION & ION EXCHANGE page.

WATER METERS

Open water systems can use a large amount of water, particularly if there are water loss issues. The installation of a water meter on make-up lines will allow the monitoring of water usage and help identify water losses for investigation.

A water meter can also be utilised for the proportional dosing of corrosion inhibitor on its signal.

DISSOLVED AIR FLOTATION (DAF) SYSTEMS

DAF is a water treatment process that clarifies wastewater through the removal of suspended matter such as oil or solids.  It is commonly used for treating industrial effluent.

Hydro Flow have the expertiese to design and install DAF systems tailored to your site needs.